Precision Group Hiring for Machine Operator Job at Dubai Full Time

• Ensure raw materials used for production are in accordance to the specifications given in the Job data sheet.
• Feed the bin with the raw material as per the Bill of Materials (BOM) and take assistance from the helpers as and when instructed by the Supervisors.
• Feed/load the sheet roll as per Bill of Materials (BOM).
• Perform minor settings on the machine (temperature, pressure, and timing) as and when required in accordance to the specifications of the product requirement.
• Follow correct procedure of machine startup and shutdown to minimize start up time wastage and/or scrap rejection.
• Observe alarm warning indicator on machine and take appropriate action to ensure that machine runs without any active alarm.
• Check and maintain the quality of the finished product and inform the supervisor and/or technician of any deviation in the product and/or abnormality in the machine.
• Pack the finished product as per the BOM with unique product identification and stack at the designated area to avoid mix-up or product damage.
• Assist the technician in mould changing operation as & when instructed by the Supervisor.
• Update the production data sheet at regular defined intervals.
• Ensure non-plastic waste/scrap material are disposed in designated bins and strictly avoid mix up of non-plastic waste material with plastic scrap/waste generated during the process.
• Strictly follow housekeeping and machine cleaning procedures to keep machine and surrounding area absolutely clean and in order.
• Follow company’s HSE guidelines in respect of all operations undertaken and follow safety precautions highlighted in the SOP & manuals. Communicate potential hazards immediately to supervisor.
• Ensure compliance to Safety, Quality, Food Safety and Environment requirements as specified in the global QHSE Management System with strict adherence to ISO and local regulatory authority.
• Ensure that all records and documents are up to date and have full traceability and retrieval at all times and that all processes, procedures & activities comply with ISO and management procedures.
• Train and guide the helpers in operating the machine as per SOP when instructed.
• Perform any other job/task assigned by the Production Supervisor to accomplish department objectives.

Requirements

• ITI

• Minimum of 2-4 years of hands-on experience required in handling thermoforming machines.

Functional Skills & Specific Knowledge:

• Knowledge of production process.
• Knowledge of mould changing / setting.
• Knowledge and experience in Mechanical, Electrical and hydraulic equipment preferred
• Mechanical Aptitude.
• Should be manually dexterous.
• Fine Motor Skills
• Agile Movement